Option 1: GO HASSLE-FREE
For total peace-of-mind, compliance with water regulations and warrantied workmanship,
we recommend installation by a Kube Technical Engineer.
we recommend installation by a Kube Technical Engineer.
How long will it take?
Installation takes up to 4 hours.
|
How much does it cost?
Our fully compliant installation costs £350 inc VAT.
If the installation is more complicated (eg. the stopcock is further than 1m from a drainage point) an additional charge will be agreed beforehand. |
What about the fitting kit?
Kube I comes with a 15mm kit
and Kube II a 22mm kit. If an upgrade to a 22mm kit is required, this will be carried out free of charge when using our installation service. |
PRE-INSTALLATION CHECKLIST
Interested in going hassle-free? We'll need to know the answers to these questions...
Where is your stopcock located? Is your stopcock within 1m of a drainage point? How many bathrooms do you have? Do you have space for your Kube? KUBE I installed size: (w) 240 x (d) 475 x (h) 520 mm KUBE II installed size: (w) 350 x (d) 630 x (h) 610 mm |
It's time to call!
|
Option 2: DIY INSTALLATION
If you decide to install your Kube, you must ensure it complies with our installation instructions and water regulations. If you need to upgrade your fitting, this can be purchased by calling 0808 164 2019.
Or, watch the installation video...
*Terms and conditions for installation
1. Installation covers 15mm or 22mm standard installation within 1m of mains water supply and drainage.
An extra supplement may be payable on installations with larger pipe sizes and unusual or complicated pipework.
2. Installation of an outside frost protection cabinet is at an additional cost.
3. The installation of a Kube Drinking Water filter is included when purchased with and installed in tandem with a Kube Water Softener.
4. Installation of any supplementary items over and above the Kube Water Softener (including Kube Water Filter– point 3)
and associated installation kit may be chargeable.
5. Not available in the Republic of Ireland, Northern Ireland and Scotland.
1. Installation covers 15mm or 22mm standard installation within 1m of mains water supply and drainage.
An extra supplement may be payable on installations with larger pipe sizes and unusual or complicated pipework.
2. Installation of an outside frost protection cabinet is at an additional cost.
3. The installation of a Kube Drinking Water filter is included when purchased with and installed in tandem with a Kube Water Softener.
4. Installation of any supplementary items over and above the Kube Water Softener (including Kube Water Filter– point 3)
and associated installation kit may be chargeable.
5. Not available in the Republic of Ireland, Northern Ireland and Scotland.